|
| Sensor Sísmico DTS² | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | ||
Sísmicos DTS² - aplicaciones (Haga click en la imágen para verla en su tamaño real, luego haga click en el boton "Volver" de su navegador)
Sísmico MS-93 DTS²
Sísmico inteligente
MS-93 is an intelligent seismic detector designed for interfacing with traditional control panels. It fits various materials in a 20 dB range. The analisys of alarms is carried out by means of a digital comparison of pre-set thresholds behaviour tables.
Furthermore there is an evolutionary integration and dynamic anlisys of temperature variance (temperature rate change) to resist attack made by means of thermal lance
 | |
MS-93 detector has III- Level IMQ ALLARME Certifiacation. Compliace to the III performance provides for the employment of a mic-test CIAS testing device.
The starting of a mic-test generates on the detector placed nearby disturbances similar to those caused by a break-in attempt. They will therefore have to respond with an alarm signal.
| Voltage supply | 13,8 Vdc |
| Surface coverage | 56 mq = 8,5 m |
| BFrequecy bandwidth | 2 KHz - 20 KHz |
| Maximum current consumption | 28 mA |
| IMQ performance level | 3rd with MIC-Test tester |
| Casing protection grade | IP3X |
| Operating enviromental conditions | +5 °C / +40 °C |
| Output interface type | Photo-coupler contacts |
| Alarm | Temperature-rate change,break-in,shock |
| Tampering | Anti-removal,anti-opening |
| Fault signal | Mno capsule,capsule short-circuit high/low voltage and temperature |
| Maximum sensitivity | 0,1 mG |
| S/N (signal to noise ratio) | 20 dB minimum |
| Test | Watch Dog and external test |
| Dimension | 184x85x50 mm |
Sísmico MS-96 DTS²
Sísmico tradicional
MS96 is a traditional seismic detector equipped with a shock and break-in function. It may be connected to any control panel supporting ON/OFF and/or balanced inputs. Output contacts are generated by a photo-coupler circuit, which is known to display no sensitivity to any type of magnetic interference.
 | |
| Voltage supply | 13,8 Vdc |
| Maximum current consumption | 11 mA(35 mA with active Test) |
| IMQ performance level | Test 2nd with Ms96/Test optional tester |
| Casing protection grade | IP3X |
| Maximum sensitivity | 0,1 mG |
| S/N (signal to noise ratio) | 20 dB minimum |
| Operating enviromental conditions | +5 °C / +40 °C |
| Output interfaces type | Photo-coupler contacts (alarm) |
| Alarm | Break-in, shock |
| Tampering | Anti-removal,anti-opening,high temperature (80 °) |
| Test interno | Test with MS-96/test optional tester |
| Surface coverage | 30 mq = 6 m |
| Frequancy bandwidth | 2 KHz - 15 KHz |
| Dimension | 184x85x50 mm |
Ventajas clave
Alta seguridad.
Superó a todos de la competencia.
IMQ 3
Haga Click AQUI para contactarnos y/o para solicitar más información a DTS².
¿MONITOREO DE ALARMAS?
Preguntas y Resp., sobre Seguridad Electrónica...
Quién es DTS²?
Una empresa al servicio de la Seguridad...
Que es la Seguridad Perimetral?
Detectar al intruso antes que ingrese a la propiedad...
Que es una cerca Gravitacional?
¡ Atrévase, lo desafiamos a vencer a...